Ram Mounts : Achat / Vente Ram Mounts sur PC21.FR

This RAM Mounts Modular Form-Fit (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-C and USB-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, RAM NFC-Extender, GDS Roto-Mag, and side accessory attachments.Modular docks are not compatible with the GDS Hand-Stand.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-SAM58CPKLN-CAU :Compatible with accessories and side accessory attachmentsCan only be used with OEM or RAM skinAccess to the stylus penEasy insertion and removalCharging function
RUT7715 RAM-HOL-SAM58CPKLN-CAU

151,91 € HT
182,29 € TTC

Sur
Commande

Ram Mounts RAM MOUNT W/ 3Inch X 11InchBASE SHRT ARM

RUT5505 RAM-D-111-C-KNOB9H

151,91 € HT
182,29 € TTC

Sur
Commande

Ram Mounts RAM NO DRILL BASE FOR PTCRUISER

RUT2131 RAM-VB-162

151,91 € HT
182,29 € TTC

Sur
Commande

Ram Mounts This RAM Mounts spring loaded holder is suitable for Zebra MC9300 & MC9400 with or without rugged boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-ZE32PDHU

- :Spring-loaded design for easy insertion and removalIncluding shims for use without rugged bootClip holder for stylusAllows scanning while dockedCharging functionHeated Pogo-PinsInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500 mAh @ 5V)Input Voltage: 9VInput
RUT7623 RAM-HOL-ZE32PDHU

152,16 € HT
182,59 € TTC

Sur
Commande

Ram Mounts RAM POWER & DATA SPRING LOADED COMBO LOCK CRADLE FOR

RUT6694 RAM-HOL-ZE10PDCLU

152,35 € HT
182,82 € TTC

Sur
Commande

Ram Mounts VEHICLE BASE SCION XB 2005-NEWER

RUT3400 RAM-VB-150

152,35 € HT
182,82 € TTC

Sur
Commande

Ram Mounts Lock Dock

Sam G Tab S2 8.0
RUT0241 RAM-GDS-DOCKL-V2-SAM18U

152,46 € HT
182,95 € TTC

Sur
Commande

Ram Mounts Lock Dock

Sam G Tab A 10.1
RUT0270 RAM-GDS-DOCKL-V2-SAM23U

152,46 € HT
182,95 € TTC

Sur
Commande

Ram Mounts GDS USB TYPE A TO 90 DEGREE DC CABLE

RUT6887 RAM-HOL-ZE7CL-CIGU

152,46 € HT
182,95 € TTC

Sur
Commande

Ram Mounts GDS VEHICLE USBC HIGH SPEED DOCK FOR INTELLISKIN NG FOR

RUT7064 RAM-GDS-DOCK-AP32CPU

152,46 € HT
182,95 € TTC

Sur
Commande

Ram Mounts RAM DBL SWING ARM 8Inch MALE9Inch FEMALE TUBE

RUT1332 RAM-VP-SW1-89

152,68 € HT
183,21 € TTC

Sur
Commande

Ram Mounts RAM W/ 3Inch X 11Inch BASE& 3 3/4Inch BASE MILIT

RUT4404 RAM-D-111-MIU

152,79 € HT
183,34 € TTC

Sur
Commande

Ram Mounts UNPKD RAM VEH GDS LOCK IPADPRO 10.5

RUT3082 RAM-GDS-DOCKL-V2-AP16U

153,12 € HT
183,74 € TTC

Sur
Commande

Ram Mounts Lock Dock

Sam G Tab A 9.7
RUT0114 RAM-GDS-DOCKL-V2-SAM15U

153,12 € HT
183,74 € TTC

Sur
Commande

Ram Mounts Lock Dock

Sam G Tab 4 8.0
RUT0291 RAM-GDS-DOCKL-V2-SAM12U

153,12 € HT
183,74 € TTC

Sur
Commande

Ram Mounts UNPK RAM POD IW HOLDR 12" TABLET X-GRIP

RUT5637 RAM-B-316-1-UN11U

153,67 € HT
184,40 € TTC

Sur
Commande

Ram Mounts GDS VEHICLE DOCK USBC HIGH SPEED FOR SAMSUNG TAB A 10.1

RUT7033 RAM-GDS-DOCK-SAM65CPU

153,78 € HT
184,53 € TTC

Sur
Commande

Ram Mounts UNPKD GDS VEHICLE DOCK USBC HIGH SPEED FOR SAMSUNG TAB A7

RUT6761 RAM-GDS-DOCK-SAM80CPU

153,78 € HT
184,53 € TTC

Sur
Commande

Ram Mounts GDS Locking Vehicle dockfor the Samsung

RUT0362 RAM-GDS-DOCKL-V2-SAM27U

153,78 € HT
184,53 € TTC

Sur
Commande

Ram Mounts This RAM Mounts Form-Fit holder is suitable for Zebra TC8300.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-ZE26PDHU

- :

• Spring-loaded design for easy insertion and removalCharging functionHeated Pogo-PinsInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500 mAh @ 5V)Input Voltage: 5.4VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertification: FCC
• CE

• RoHSAdditional information: Devices shown are not inc

RUT7633 RAM-HOL-ZE26PDHU

154,06 € HT
184,87 € TTC

Sur
Commande