| | DESIGNATION |
REMISE |
PRIX |
DISPO | |
 |
RUT3362 RAM-HOL-UN9-235U
| |
139,81 € HT
167,77 € TTC | Sur
Commande | 
|
|
RUT2978 RAM-B-152
| |
139,81 € HT
167,77 € TTC | Sur
Commande |
|
|
lockable (key], USB-A/-C input, 2-hole AMPS mount
RUT7541 RAM-GDS-DOCKL-V12-ZE2434CPDU
| |
139,89 € HT
167,86 € TTC | Sur
Commande |
|
|
This RAM Mounts GDS holder is suitable for Zebra EC50 & EC 55 with the IntelliSkin protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged.While keeping the Zebra EC5x secure, the powered dock also leaves the device?s top scanner and buttons exposed and usable.Available space in the back accommodates standard and extended battery packs as well with the Zebra hand strap.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-V12-ZE16CPDU :Only compatible with the IntelliSkin protective sleeveSpring-loaded design for easy insertion and removalIntegrated Stylus holderCharging functionInput Connector: USB-COutput Connector: USB-A (Peripheral output
RUT7710 RAM-GDS-DOCK-V12-ZE16CPDU
| |
139,92 € HT
167,90 € TTC | Sur
Commande |
|
|
This RAM Mounts Modular Form-Fit holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-C cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, RAM NFC-Extender, GDS Roto-Mag, and side accessory attachments.Modular docks are not compatible with the GDS Hand-StandThe back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-SAM58CPKLN-CU :Compatible with accessoriesCan only be used with OEM or RAM skinAccess to the stylus penEasy insertion and removalCharging functionLockable with keyInput Connector: USB-COutput Connector:
RUT7714 RAM-HOL-SAM58CPKLN-CU
| |
140,09 € HT
168,10 € TTC | Sur
Commande |
|
|
La station d'accueil RAM Mounts GDS Uni-Conn est une station d'accueil autonome de 7 pouces conçue pour les appareils enfermés dans un IntelliSkin Thin-Case avec des Pogo Pads arrière.Cette solution peut pivoter à 180 degrés et permettre à l'appareil d'incliner 180 degrés, ce qui la rend idéale pour les industries axées sur les clients comme le commerce de détail, l'hôtellerie, la restauration, et plus encore.Elle dispose d'une plaque d'adaptation pour un montage par perçage, offrant une base stable.L'alimentation est fournie via une connexion USB-C aux Pogo Pads arrière intégrés dans le IntelliSkin Thin-Case.Elle prend également en charge un processus d'ancrage et de désancrage facile :
• L'appareil dans l'étui de protection IntelliSkin est simplement inséré dans la base de la station d'accueil et poussé jusqu'à ce qu'il s'enclenche.Pour le retirer
| | • une simple pression sur le levier libère la tablette.Caractéristiques du produit RAM-GDS-DOCK-D11-7-U3C :Compatible uniquement avec l'étui IntelliSkin Thin-Case (
|
RUT7814 RAM-GDS-DOCK-D11-7-U3C
| |
140,18 € HT
168,21 € TTC | Sur
Commande |
|
|
RUT2241 RAM-290U
| |
140,25 € HT
168,30 € TTC | Sur
Commande |
|
|
RUT7485 RAM-HOL-SAM57CPKL-1AU
| |
140,25 € HT
168,30 € TTC | Sur
Commande |
|
|
RUT7892 RAM-HOL-ZE47PDU
| |
140,36 € HT
168,43 € TTC | Sur
Commande |
|
|
RUT7088 RAM-HOL-ZE11PCLU
| |
140,69 € HT
168,82 € TTC | Sur
Commande |
|
|
RUT3830 RAM-HOL-IN11PEBU
| |
141,02 € HT
169,22 € TTC | Sur
Commande |
|
|
RUT6585 RAM-GDS-DOCK-SAM76U
| |
141,02 € HT
169,22 € TTC | Sur
Commande |
|
|
RUT7673 RAM-HOL-ZE33PDLU
| |
141,02 € HT
169,22 € TTC | Sur
Commande |
|
|
RUT0493 RAM-109V-2U
| |
141,46 € HT
169,75 € TTC | Sur
Commande |
|
|
RUT6594 RAM-GDS-DOCK-AP32U
| |
141,68 € HT
170,01 € TTC | Sur
Commande |
|
|
RUT7916 RAM-GDS-DOCKL-U4CP-CAU
| |
142,13 € HT
170,55 € TTC | Sur
Commande |
|
|
RUT7085 RAM-HOL-ZE10PKLU
| |
142,34 € HT
170,80 € TTC | Sur
Commande |
|
|
RUT3021 RAM-238-WCT-9-MS2
| |
142,34 € HT
170,80 € TTC | Sur
Commande |
|
|
RUT7910 RAM-HOL-SAM52CP-RJ45AU
| |
142,56 € HT
171,07 € TTC | Sur
Commande |
|
|
RUT6972 RAM-GDS-DOCK-SAM66U
| |
143,11 € HT
171,73 € TTC | Sur
Commande |
|
|
This RAM Mounts Form-Fit holder is suitable for Zebra TC8300.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-ZE26PHU :
• Spring-loaded design for easy insertion and removalCharging functionHeated Pogo-PinsInput Connector: 5.5mm DCInput Voltage: 5.4VInput Cable Length: ca. 100 cmCertification: FSS
• CE
| | • RoHSAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE26PHU holder is supplied.
|
RUT7650 RAM-HOL-ZE26PHU
| |
143,17 € HT
171,80 € TTC | Sur
Commande |
|
|
RUT3597 RAM-VP-SW2-89-2461
| |
143,55 € HT
172,26 € TTC | Sur
Commande |
|
|
RUT6769 RAM-HOL-ZE10PD2U
| |
143,66 € HT
172,39 € TTC | Sur
Commande |
|
|
RUT1612 RAM-VP-SW1-12-2461
| |
143,99 € HT
172,78 € TTC | Sur
Commande |
|
|
RUT4763 RAM-VB-169
| |
144,10 € HT
172,92 € TTC | Sur
Commande |
|
|
RUT2607 RAM-D-111
| |
144,10 € HT
172,92 € TTC | Sur
Commande |
|
|
RUT2297 RAM-D-111U
| |
144,10 € HT
172,92 € TTC | Sur
Commande |
|
|
11-16 VDC, 85 Watt
RUT7548 RAM-DOCK-HEATER1-EU
| |
144,19 € HT
173,02 € TTC | Sur
Commande |
|
|
RUT6986 RAM-GDS-DOCK-SAM67CPU
| |
144,43 € HT
173,31 € TTC | Sur
Commande |
|
|
RUT7047 RAM-GDS-DOCK-SAM75U
| |
144,43 € HT
173,31 € TTC | Sur
Commande |
|
|
RUT6862 RAM-GDS-DOCK-V10PDU
| |
144,43 € HT
173,31 € TTC | Sur
Commande |
|
|
RUT7063 RAM-GDS-DOCK-SAM78U
| |
144,43 € HT
173,31 € TTC | Sur
Commande |
|
|
RUT1608 RAM-251-1SA
| |
144,54 € HT
173,44 € TTC | Sur
Commande |
|
|
RUT3397 RAM-VB-110
| |
144,54 € HT
173,44 € TTC | Sur
Commande |
|
|
The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Left) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter.This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection.With the dual USB-A port, you can integrate a peripheral device into your setup.The docking and undocking process is simple :
• Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it
• simply press the lever to release the tablet.For the docking station to function
• the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case.Currently
• the following devices are compatible with this fixed docking height:Samsung Tab A7 Lite
• Tab A 8.4
| | • Tab S9 FE
• Tab S9 FE+
• Tab Active5
• Tab Active3
• and Tab A9+.This holder provides a reliable solut
|
RUT7868 RAM-GDS-DOCKLL-U1CD2U
| |
144,68 € HT
173,61 € TTC | Sur
Commande |
|
|
The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Right) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter.This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection.With the dual USB-A port, you can integrate a peripheral device into your setup.The docking and undocking process is simple :
• Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place.To remove it
• simply press the lever to release the tablet.For the docking station to function
• the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case.Currently
• the following devices are compatible with this fixed docking height:Samsung Tab A7 Lite
• Tab A 8.4
| | • Tab S9 FE
• Tab S9 FE+
• Tab Active5
• Tab Active3
• and Tab A9+.This holder provides a reliable solu
|
RUT7866 RAM-GDS-DOCKLR-U1CD2U
| |
144,68 € HT
173,61 € TTC | Sur
Commande |
|
|
RUT1219 RAM-VP-SW1-45
| |
144,87 € HT
173,84 € TTC | Sur
Commande |
|
|
RUT5093 RAM-VB-179
| |
144,98 € HT
173,97 € TTC | Sur
Commande |
|
|
RUT2206 RAM-VP-SW2-89-240
| |
145,31 € HT
174,37 € TTC | Sur
Commande |
|
|
lockable (key], USB-C input/output, 4-hole AMPS mount
RUT7544 RAM-HOL-SAM57CPKL-CU
| |
145,42 € HT
174,50 € TTC | Sur
Commande |
|
01 43 00 43 08 (lundi au jeudi 8H30 18H30, vendredi 8H30 17H30) Contactez-nous
