| | DESIGNATION |
REMISE |
PRIX |
DISPO | |
 |
RUT6754 RAM-238-WCT-9-UN9
| |
214,39 € HT
257,26 € TTC | Sur
Commande | 
|
|
RUT7564 RAM-HOL-SAM58CPKLT-RJ45AU
| |
214,39 € HT
257,26 € TTC | Sur
Commande |
|
|
RUT7183 RAM-HOL-ZE15PD2KLU
| |
214,39 € HT
257,26 € TTC | Sur
Commande |
|
|
RUT4749 RAM-GDS-DOCKL-V2-SAM29CU
| |
214,61 € HT
257,53 € TTC | Sur
Commande |
|
|
RUT7601 RAM-GDS-DOCK-V12-U1CPDHU
| |
215,27 € HT
258,32 € TTC | Sur
Commande |
|
|
RUT7198 RAM-316-HD-18-TAB24U
| |
215,27 € HT
258,32 € TTC | Sur
Commande |
|
|
RUT7094 RAM-HOL-ZE11PDKL-DB9U
| |
215,27 € HT
258,32 € TTC | Sur
Commande |
|
|
RUT7128 RAM-GDS-DOCK-AP32CDU
| |
216,59 € HT
259,90 € TTC | Sur
Commande |
|
|
RUT0501 RAM-101U-VE2
| |
217,03 € HT
260,43 € TTC | Sur
Commande |
|
|
RUT6903 RAM-GDS-DOCKL-SAM67CU
| |
217,25 € HT
260,70 € TTC | Sur
Commande |
|
|
This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM62CP-NFCU :Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AInput Cable Length: ca. 21 cmPrepared for GDS-FAN 12-VDC axial fanIncluding RAM NFC-ExtenderAdditional information: This product is not compatible with the GDS Hand-Stand.This holder will not support any NFC functionality of the Tab Active2Potential interference of NFC functionality may occur when positioned close to
RUT7698 RAM-GDS-DOCK-SAM62CP-NFCU
| |
217,46 € HT
260,95 € TTC | Sur
Commande |
|
|
RUT6842 RAM-HOL-SAM61PD2U
| |
217,47 € HT
260,96 € TTC | Sur
Commande |
|
|
RUT3937 RAM-VPR-105T-B-1
| |
217,91 € HT
261,49 € TTC | Sur
Commande |
|
|
RUT6582 RAM-GDS-DOCKF-AP32CU
| |
218,68 € HT
262,41 € TTC | Sur
Commande |
|
|
RUT7199 RAM-316-HD-18-TAB20U
| |
219,12 € HT
262,94 € TTC | Sur
Commande |
|
|
RUT7006 RAM-GDS-DOCKF-SAM76CU
| |
219,34 € HT
263,20 € TTC | Sur
Commande |
|
|
La station d'accueil RAM Mounts GDS Uni-Conn est une station autonome conçue pour les appareils encapsulés dans un IntelliSkin Next-Gen, un IntelliSkin Hard Case ou un IntelliSkin Thin Case avec un adaptateur GDS Uni-Conn monté.Cette solution peut pivoter sur 180 degrés et permettre à l'appareil de s'incliner sur 180 degrés, ce qui la rend idéale pour les industries axées sur les clients telles que la vente au détail, l'hôtellerie, la restauration et plus encore.Le support à enclenchement maintient votre appareil en place en toute sécurité tout en permettant une charge rapide grâce aux broches pogo intégrées, l'alimentation étant fournie via une connexion USB-C.La station d'accueil est dotée d'une base lestée et de coussinets en caoutchouc qui l'empêchent de glisser sur les surfaces.Elle prend également en charge un processus d'ancrage et de désancrage facile :Insérez la tablette avec la housse de protection IntelliSkin et l'adaptateur GDS Uni-Conn monté dans la base de la station d'accueil et poussez-la ve
RUT7759 RAM-GDS-DOCK-D14-U1C-GRY
| |
219,50 € HT
263,40 € TTC | Sur
Commande |
|
|
RUT6635 RAM-GDS-DOCKL-SAM76CU
| |
220,00 € HT
264,00 € TTC | Sur
Commande |
|
|
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDLU :Compatible with Zeb
RUT7614 RAM-HOL-ZE25PDLU
| |
220,16 € HT
264,19 € TTC | Sur
Commande |
|
|
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PLU :Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for atta
RUT7646 RAM-HOL-ZE25PLU
| |
220,55 € HT
264,66 € TTC | Sur
Commande |
|
|
RUT2953 RAM-162V-MC4
| |
220,55 € HT
264,66 € TTC | Sur
Commande |
|
|
RUT7333 RAP-401-9-BC-UN9U
| |
220,99 € HT
265,18 € TTC | Sur
Commande |
|
|
RUT7038 RAM-GDS-DOCKLF-SAM76U
| |
221,32 € HT
265,58 € TTC | Sur
Commande |
|
|
RUT7412 RAM-GDS-DOCKLF-SAM65CPU
| |
221,32 € HT
265,58 € TTC | Sur
Commande |
|
|
RUT6976 RAM-GDS-DOCKF-SAM67CU
| |
221,98 € HT
266,37 € TTC | Sur
Commande |
|
|
RUT6615 RAM-GDS-DOCKL-AP32CU
| |
222,75 € HT
267,30 € TTC | Sur
Commande |
|
|
RUT6760 RAM-GDS-DOCK-SAM80CDU
| |
223,41 € HT
268,09 € TTC | Sur
Commande |
|
|
RUT3399 RAM-VB-193
| |
223,74 € HT
268,48 € TTC | Sur
Commande |
|
|
RUT1771 RAM-E-101U-D-IN1
| |
223,96 € HT
268,75 € TTC | Sur
Commande |
|
|
RUT6639 RAM-GDS-DOCKLF-AP32U
| |
224,07 € HT
268,88 € TTC | Sur
Commande |
|
|
RUT7590 RAM-GDS-DOCKL-SAM54NCPU
| |
224,07 € HT
268,88 € TTC | Sur
Commande |
|
|
This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX10 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4PDKLU :Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalLockable w
RUT7656 RAM-HOL-GE4PDKLU
| |
224,40 € HT
269,28 € TTC | Sur
Commande |
|
|
RUT2776 RAM-VB-117-243
| |
224,40 € HT
269,28 € TTC | Sur
Commande |
|
|
RUT4394 RAM-VBD-122-PV1
| |
224,51 € HT
269,41 € TTC | Sur
Commande |
|
|
RUT7729 RAM-HOL-GE5PU
| |
224,51 € HT
269,41 € TTC | Sur
Commande |
|
|
RUT6953 RAM-GDS-DOCKL-SAM78CU
| |
224,73 € HT
269,67 € TTC | Sur
Commande |
|
|
RUT3641 RAM-160BU
| |
224,84 € HT
269,80 € TTC | Sur
Commande |
|
|
RUT6900 RAM-GDS-DOCKF-SAM78CU
| |
225,39 € HT
270,46 € TTC | Sur
Commande |
|
|
RUT6590 RAM-GDS-DOCKLF-SAM66CPU
| |
225,39 € HT
270,46 € TTC | Sur
Commande |
|
|
RUT6584 RAM-GDS-DOCKL-SAM65CU
| |
226,05 € HT
271,26 € TTC | Sur
Commande |
|
01 43 00 43 08 (lundi au jeudi 8H30 18H30, vendredi 8H30 17H30) Contactez-nous
